IGNITION COIL AND SPARK PLUG > REMOVAL |
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
![]() |
Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
| 2. REMOVE AIR CLEANER HOSE ASSEMBLY |
![]() |
Disconnect the vacuum hose and ventilation hose.
Loosen the 2 clamps.
Remove the air cleaner hose.
| 3. REMOVE IGNITION COIL ASSEMBLY |
![]() |
Disconnect the 8 ignition coil connectors.
Remove the 8 bolts and 8 ignition coils.
| 4. REMOVE SPARK PLUG |
Using a 16 mm plug wrench, remove the 8 spark plugs.