FRONT SEAT OUTER BELT ASSEMBLY > INSPECTION |
| 1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY LH (for Driver Side) |
![]() |
Before installing the seat belt, check the ELR.
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the operation is not as specified, replace the seat belt assembly.
| 2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY RH (for Front Passenger Side) |
![]() |
Before installing the seat belt, check the ELR.
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the operation is not as specified, replace the seat belt assembly.
Check the fastening function of the child restraint system.
When the belt is pulled out fully, the belt should automatically start to retract.
After the belt has fully retracted, the belt should be able to be pulled out and retracted again.
If the operation is not as specified, replace the belt assembly.