Home › Engine / Hybrid System ยท 3UR-FE › ENGINE CONTROL › KNOCK SENSOR

KNOCK SENSOR > REMOVAL

for Preparation Click here



1. REMOVE INTAKE MANIFOLD
  1. Remove the intake manifold (Click here).



2. REMOVE NO. 2 CYLINDER HEAD COVER


A158576
  1. Remove the No. 2 cylinder head cover.



3. REMOVE NO. 1 ENGINE COVER


A158581
  1. Remove the No. 1 engine cover.



4. REMOVE KNOCK SENSOR


A158615
  1. Disconnect the 4 knock sensor connectors.

  1. Remove the 4 bolts and 4 knock sensors.