Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR

FRONT EVAPORATOR TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT AIR CONDITIONING UNIT
  1. Remove the front air conditioning unit (Click here).



2. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY


I104402
  1. Disengage the 4 claws and remove the nozzle.



3. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY


I104404
  1. Remove the screw and the air duct.



4. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


I104405
  1. Disconnect the connector.

  1. Remove the 2 screws and the amplifier.



5. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY


E145022
  1. Remove the packing.



    I104416
  1. Disengage the 3 claws and remove the heater clamp.



    I104417
  1. Remove the 6 screws.

  1. Disengage the 3 claws and remove the air conditioning radiator.



6. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    E145024
  1. Remove the evaporator from the blower case.



7. REMOVE EVAPORATOR TEMPERATURE SENSOR


E145025
  1. Remove the sensor.