TRANSPONDER KEY AMPLIFIER > INSTALLATION |
| 1. INSTALL TRANSPONDER KEY AMPLIFIER |
![]() |
Install the transponder key amplifier.
Connect the connector.
| 2. INSTALL UPPER STEERING COLUMN COVER |
![]() |
Engage the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.
Engage the claw to install the upper steering column cover.
| 3. INSTALL LOWER STEERING COLUMN COVER |
![]() |
Engage the 2 claws to install the lower steering column cover.
While turning the steering wheel to the right and left, install the 2 screws and the lower steering column cover.
| 4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Engage the 2 claws and install the sensor.
Connect the connectors.
Engage the 4 clips and claw and install the finish panel.
Install the 2 <A> bolts.
| 5. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Engage the 4 guides and 3 claws and install the side panel.
| 6. INSTALL COWL SIDE TRIM BOARD LH |
| 7. INSTALL FRONT DOOR SCUFF PLATE LH |