DRIVE BELT > ON-VEHICLE INSPECTION |
| 1. INSPECT FAN AND GENERATOR V BELT |
![]() |
Check the belt for wear, cracks or other signs of damage.
If any of the following defects is found, replace the fan and generator V belt.
![]() |
Check that the belt fits properly in the ribbed grooves.
| 2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY |
![]() |
Check that the belt tensioner moves downward when the belt is pressed down at the point indicated in the illustration with approximately 98 N (10 kgf, 22.0 lbf) of force.
![]() |
Check that the arrow on the belt tensioner is within area "A".
If it is outside area "A", replace the fan and generator V belt.