FRONT SEAT ASSEMBLY (for Power Seat) > INSTALLATION |
| 1. INSTALL FRONT SEAT ASSEMBLY LH (w/ Leg Support Adjustment Switch) |
Install the front seat.
Connect the seat wire connectors under the seat.
Connect the cable to the negative (-) battery terminal.
![]() |
Operate the leg support adjustment switch to move the seat cushion to the closed position.
Operate the power seat switch to move the seat to the rearmost position.
![]() |
Install the 2 bolts.
Operate the power seat switch to move the seat to the foremost position.
![]() |
Install the 2 bolts.
| 2. INSTALL FRONT SEAT ASSEMBLY LH (w/o Leg Support Adjustment Switch) |
Install the front seat.
Connect the seat wire connectors under the seat.
Connect the cable to the negative (-) battery terminal.
Operate the power seat switch to move the seat to the rearmost position.
![]() |
Install the 2 bolts.
Operate the power seat switch to move the seat to the foremost position.
![]() |
Install the 2 bolts.
| 3. INSTALL SEAT TRACK COVER LH |
![]() |
Engage the 2 claws to install the seat track cover.
| 4. INSTALL SEAT TRACK COVER INNER LH |
![]() |
Engage the 2 claws to install the seat track cover.
| 5. INSTALL FRONT SEAT HEADREST ASSEMBLY |
| 6. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).
| 7. INSPECT FRONT SEAT ASSEMBLY LH (w/ Memory) |
Check the power seat operation (Click here).
| 8. INSPECT FRONT SEAT ASSEMBLY LH (w/o Memory) |
Check the power seat operation (Click here).
| 9. INSPECT FRONT SEAT ASSEMBLY LH (w/ Seat Heater System) |
Check the seat heater operation.
Turn the ignition switch ON.
When the seat heater switch is turned ON, check that the indicator light illuminates, and that the seat surface warms up in approximately 5 minutes.
When the seat heater switch's volume switch is operated, check that the seat surface temperature changes.
| 10. INSPECT FRONT SEAT ASSEMBLY LH (w/ Climate Control Seat System) |
Check the climate control operation (Click here).