Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH

SEAT MEMORY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT SEAT MEMORY SWITCH


B194035E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    2 (M1) - 4 (E)
    1 switch pressed
    Below 1 Ω
    3 (M2) - 4 (E)
    2 switch pressed
    1 (MRY) - 4 (E)
    SET switch pressed

    If the result is not as specified, replace the switch.