Home › Drivetrain ยท A750E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REASSEMBLY

for Preparation Click here



1. INSTALL SHIFT LOCK CONTROL ECU


    C179217
  1. Engage the 3 claws, and install the shift lock control ECU.

  1. Connect the shift lock solenoid connector.



2. INSTALL LOWER POSITION INDICATOR HOUSING


    C179216
  1. Engage the 6 claws, and install the lower position indicator housing.



3. INSTALL SHIFT LOCK RELEASE BUTTON


    C179214
  1. Engage the 2 claws, and install the shift lock release spring and shift lock release button.



4. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER


    C179213
  1. Install the No. 2 position indicator slide cover to the position indicator slide cover.



5. INSTALL POSITION INDICATOR SLIDE COVER


    C179212
  1. Install the position indicator slide cover with the No. 2 position indicator slide cover.

    HINT:
    Install the position indicator slide cover so that its mark faces the vehicle front.



6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY


    C179211
  1. Engage the 4 claws, and install the position indicator housing.



7. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY


    C179210
  1. Align the wire with the key part of the position indicator housing lower, and install the wire. Then rotate the wire clockwise until it locks.



    C177414E01
  1. Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.



    C179245
  1. Check the indicator light wire harness as shown in the illustration.