SHIFT LEVER > REASSEMBLY |
| 1. INSTALL SHIFT LOCK CONTROL ECU |
![]() |
Engage the 3 claws, and install the shift lock control ECU.
Connect the shift lock solenoid connector.
| 2. INSTALL LOWER POSITION INDICATOR HOUSING |
![]() |
Engage the 6 claws, and install the lower position indicator housing.
| 3. INSTALL SHIFT LOCK RELEASE BUTTON |
![]() |
Engage the 2 claws, and install the shift lock release spring and shift lock release button.
| 4. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER |
![]() |
Install the No. 2 position indicator slide cover to the position indicator slide cover.
| 5. INSTALL POSITION INDICATOR SLIDE COVER |
![]() |
Install the position indicator slide cover with the No. 2 position indicator slide cover.
| 6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY |
![]() |
Engage the 4 claws, and install the position indicator housing.
| 7. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
![]() |
Align the wire with the key part of the position indicator housing lower, and install the wire. Then rotate the wire clockwise until it locks.
![]() |
Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.
![]() |
Check the indicator light wire harness as shown in the illustration.