Home › Audio/Visual/Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here ).



2. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    Remove the front seat RH (Click here).

  1. for Power Seat:
    Remove the front seat RH (Click here).



3. REMOVE AUDIO AMPLIFIER COVER


B190162
  1. Disengage the 3 clips and remove the cover.



4. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY


B190161
  1. Disconnect the 4 connectors.

  1. Remove the 3 bolts and amplifier.