Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION ANTENNA ASSEMBLY


    E159004
  1. Install the antenna with the 2 screws.

  1. Engage the clamp.



2. INSTALL DEFROSTER NOZZLE ASSEMBLY


B192355
  1. Install the defroster nozzle with the 3 <G> screws.



3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


B192353
  1. Engage the 2 claws and install the duct.

  1. Install the 2 <G> screws.



4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


B192354
  1. Engage the 2 claws and install the duct.

  1. Install the 2 <G> screws.



5. INSTALL NO. 1 HEATER TO REGISTER DUCT
  1. Install the duct with the 5 <G> screws.



  1. Engage the clamp.


    B192352



6. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. Install the instrument panel (Click here ).



7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }