Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here ).



2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the instrument panel (Click here ).



3. REMOVE NO. 1 HEATER TO REGISTER DUCT
  1. Disengage the clamp.



  1. Remove the 5 screws and duct.


    B192352



4. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


B192354
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the duct.



5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


B192353
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the duct.



6. REMOVE DEFROSTER NOZZLE ASSEMBLY


B192355
  1. Remove the 3 screws and the defroster nozzle.



7. REMOVE NAVIGATION ANTENNA ASSEMBLY


    E159004
  1. Disengage the clamp.

  1. Remove the 2 screws and antenna.