Home › Audio/Visual/Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedures listed below are for the RH side.



1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)


    B191806
  1. Engage the 3 claws and install the speaker to the lower frame bracket garnish.

    NOTICE:
    Do not touch the cone part of the speaker.



2. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    E161076
  1. Engage the 3 claws.



    E161072
  1. Install the speaker with the 4 screws.

    NOTICE:
    Do not touch the cone part of the speaker.

  1. Connect the connector.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
  1. Connect the connectors.



    B190543
  1. Connect the front door lock remote control cable and the front door inside locking cable.



    B190542
  1. Engage the 10 clips and install the front door trim board sub-assembly.



    B190541
  1. Tighten the 2 screws.

  1. Install the front door armrest cover.



4. INSTALL FRONT UPPER ARMREST BASE PANEL RH


B190537
  1. Connect the connector.

  1. Engage the 2 clips and 5 claws and install the front armrest base upper panel.



5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG RH


    B190540
  1. Engage the 4 claws and install the front door inside handle bezel plug



6. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH RH


B190538
  1. Connect the connector.

  1. Engage the 3 clips and install the front door lower frame bracket garnish.