Home › Audio/Visual/Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for Standard)


E144966E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    3.2 to 4.8 Ω

    If the result is not as specified, replace the speaker assembly.



2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 14 Speakers)


E144966E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.5 to 2.1 Ω

    If the result is not as specified, replace the speaker assembly.



3. INSPECT FRONT NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)


E146499E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    2.5 to 3.5 Ω

    If the result is not as specified, replace the speaker assembly.