Home › Audio/Visual/Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER

INSTRUMENT PANEL SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for Standard)


E146506E08
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 3
    Always
    Below 1 Ω
    2 - 4
    3 - 4
    Always
    3.6 to 4.4 Ω

    If the result is not as specified, replace the speaker assembly.



2. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)


E144969E21
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 4
    Always
    1.3 to 2.3 Ω
    3 - 1
    Always
    Below 1 Ω
    4 - 2

    If the result is not as specified, replace the speaker assembly.



3. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)


E146506E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.5 to 2.1 Ω

    If the result is not as specified, replace the speaker assembly.