STEREO JACK ADAPTER ASSEMBLY > INSTALLATION |
| 1. INSTALL STEREO JACK ADAPTER ASSEMBLY |
![]() |
Connect the connector.
![]() |
Engage the 2 claws to install the adapter.
| 2. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Connect the connectors.
Engage the 4 clips and 2 claws and install the finish panel.
| 3. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connectors.
Engage the 6 clips and install the console panel.
Install the clip.
| 4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Engage the 12 clips and install the console panel.
| 5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.