TIMING BELT > INSPECTION |
| 1. INSPECT TIMING BELT |
Visually check the timing belt for excessive wear, frayed cords, etc.
If necessary, replace the timing belt.
![]() |
| 2. INSPECT TIMING BELT TENSIONER ASSEMBLY |
![]() |
Visually check the seal portion of the tensioner for oil leakage.
If leakage is found, replace the tensioner.
![]() |
Hold the tensioner with both hands and push the push rod strongly as shown to check that it does not move.
If the push rod moves, replace the tensioner.
![]() |
Measure the protrusion of the push rod from the housing end.
| 3. INSPECT NO. 1 TIMING BELT IDLER SUB-ASSEMBLY |
![]() |
Visually check the seal portion of the idler for oil leakage.
If leakage is found, replace the idler.
Check that the idler turns smoothly.
If necessary, replace the idler.