Home › Engine / Hybrid System ยท 2UZ-FE › EMISSION CONTROL › AIR INJECTION DRIVER

AIR INJECTION DRIVER > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR INJECTION CONTROL DRIVER (for Bank 1)


    A159760
  1. Remove the 2 bolts.



    A159761
  1. Remove the 2 screws and air injection control driver from the air injection control bracket.



2. REMOVE AIR INJECTION CONTROL DRIVER (for Bank 2)


    A159762
  1. Remove the 2 screws and air injection control driver from the air injection control bracket.