4WD CONTROL SWITCH > INSTALLATION |
| 1. INSTALL 4WD CONTROL SWITCH |
![]() |
Attach the 3 claws to install the switch.
| 2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Engage the 12 clips and install the finish panel.
Connect the 2 connectors and clamp.
![]() |
Engage the 4 claws and install the instrument panel finish panel retainer.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
| 4. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
engage the 3 claws to install the hood lock lever
| 5. INSTALL INSTRUMENT SIDE PANEL LH |
| 6. INSTALL COWL SIDE TRIM BOARD LH |
| 7. INSTALL FRONT DOOR SCUFF PLATE LH |