Home › Vehicle Interior › INTERIOR PANELS / TRIM › OVERHEAD CONSOLE BOX

OVERHEAD CONSOLE BOX > INSTALLATION

for Preparation Click here



1. INSTALL ROOF CONSOLE BOX ASSEMBLY (for Short Type)
  1. Connect the connector.



    B190156
  1. Engage the 2 guides and using a "TORX" socket wrench T20, install the roof console box with the 4 screws.



2. INSTALL ROOF CONSOLE BOX ASSEMBLY (for Long Type)
  1. Connect the connector.



  1. Engage the 2 guides and using a "TORX" socket wrench T20, install the roof console box with the 6 screws.


    B191410

  1. Engage the 4 claws and install the lens.