Home › Vehicle Interior › INTERIOR PANELS / TRIM › OVERHEAD CONSOLE BOX

OVERHEAD CONSOLE BOX > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY (for Short Type)


    B190156
  1. Disengage the 2 guides and using a "TORX" socket wrench T20, remove the 4 screws.

  1. Disconnect the connector and then remove the roof console box.



2. REMOVE ROOF CONSOLE BOX ASSEMBLY (for Long Type)


  1. Using a screwdriver, disengage the 4 claws and remove the lens.


    B191409E01

  1. Disengage the 2 guides and using a "TORX" socket wrench T20, remove the 6 screws.

  1. Disconnect the connector and then remove the roof console box.