Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY

REAR NO. 1 SEAT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The procedure listed below is for the RH side.



1. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
  1. Install the rear No. 1 seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



    B191135
  1. Insert the 2 locating pins through the 2 body holes, move the rear No. 1 seat to its rearmost position, and make sure that the inner and outer seat tracks are locked securely.

  1. Install the 2 bolts.

    Torque:
    37 N*m{ 374 kgf*cm , 27 ft.*lbf }



    B191080
  1. Operate the seat track adjusting handle to move the seat to the foremost position and make sure that the inner and outer seat tracks are locked securely.

  1. Install the 2 bolts.

    Torque:
    37 N*m{ 374 kgf*cm , 27 ft.*lbf }



2. INSTALL REAR NO. 1 SEAT ASSEMBLY RH (w/ Seat Heater System)
  1. Install the rear No. 1 seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



    B191135
  1. Insert the 2 locating pins through the 2 body holes, move the rear No. 1 seat to its rearmost position, and make sure that the inner and outer seat tracks are locked securely.

  1. Install the 2 bolts.

    Torque:
    37 N*m{ 374 kgf*cm , 27 ft.*lbf }



    B191080
  1. Operate the seat track adjusting handle to move the seat to the foremost position and make sure that the inner and outer seat tracks are locked securely.

  1. Install the 2 bolts.

    Torque:
    37 N*m{ 374 kgf*cm , 27 ft.*lbf }



    B191078
  1. Engage the wire harness clamp and connect the seat heater connector.



3. INSTALL SEAT TRACK BRACKET COVER INNER (w/ Center Seat)


    B191076
  1. Engage the 9 clips and install the seat track bracket cover.



4. INSTALL SEAT TRACK BRACKET COVER INNER


    B191077
  1. Engage the 6 clips and install the seat track bracket cover.

  1. Operate the seat track adjusting handle to move the seat to the rearmost position.



5. INSTALL REAR SEAT TRACK BRACKET COVER INNER


    B195211
  1. Engage the 2 claws and install the rear seat track bracket cover.



6. INSTALL REAR SEAT TRACK BRACKET COVER OUTER


    B191075
  1. Engage the 2 claws and install the rear seat track bracket cover.



7. INSTALL REAR DOOR SCUFF PLATE RH


    B186666
  1. Engage the 2 claws and 5 clips to install the rear door scuff plate.

  1. Install the 2 bolts.



    B186665
  1. Engage the 6 claws and the 5 clips and the 2 guides, and install the rear door scuff plate.

  1. Install the screw.



8. INSTALL REAR FLOOR STEP NO. 1 COVER


    B191404
  1. Engage the 2 claws and install the rear floor step No. 1 cover.



9. INSTALL REAR FLOOR STEP NO. 2 COVER


    B193890
  1. Engage the 2 claws and the install the rear floor step No. 2 cover.



10. INSTALL REAR SEAT CUSHION HINGE COVER LOWER RH


    B191794
  1. Engage the 2 clips and the 5 claws, and install the rear cushion hinge lower cover RH.