Home › Audio/Visual/Telematics › AUDIO / VIDEO › TELEVISION DISPLAY

TELEVISION DISPLAY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here ).



2. REMOVE ROOM NO. 1 LIGHT ASSEMBLY


    B193035E01
  1. Using a moulding remover D, disengage the 4 clips.



    B191797
  1. Disconnect the connector and then remove the No. 1 room light assembly.



3. REMOVE TELEVISION DISPLAY ASSEMBLY


    B191400
  1. Disengage the clamp.

  1. Disconnect the connector.



    E161064
  1. Remove the 4 bolts.

  1. Disengage the 2 clips and remove the television display.



4. REMOVE ROOF HEADLINING ASSEMBLY
  1. Remove the roof headlining (Click here).



5. REMOVE TELEVISION DISPLAY BRACKET


E161065
  1. Remove the 4 bolts.

  1. Disengage the clip and 2 claws, and remove the bracket.