Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 HEADLIGHT BULB


    E145623
  1. Install the No. 1 headlight bulb.

  1. Turn the No. 1 headlight bulb, in the direction indicated by the arrow in the illustration, to install it.



2. INSTALL FRONT TURN SIGNAL LIGHT BULB


    E145624
  1. Install the front turn signal light bulb into the light socket.

  1. Turn the front turn signal light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



3. INSTALL NO. 2 HEADLIGHT BULB


    E145625
  1. Install the No. 2 headlight bulb.

  1. Turn the No. 2 headlight bulb, in the direction indicated by the arrow in the illustration, to install it.



4. INSTALL CLEARANCE LIGHT BULB


    E145626
  1. Install the clearance light bulb into the light socket.

  1. Turn the clearance light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


    E161331
  1. Remove the 3 screws and headlight washer actuator sub-assembly LH.