FRONT BUMPER > REMOVAL |
| 1. REMOVE FRONT END PANEL LH (w/o Headlight Cleaner System) |
![]() |
Remove the 2 clips.
![]() |
Disengage the 2 clips and remove the front end panel.
| 2. REMOVE FRONT END PANEL RH (w/o Headlight Cleaner System) |
| 3. REMOVE FRONT END PANEL LH (w/ Headlight Cleaner System) |
![]() |
Remove the 2 clips.
![]() |
Disengage the 2 claws and 2 clips and remove the front end panel.
| 4. REMOVE FRONT END PANEL RH (w/ Headlight Cleaner System) |
| 5. REMOVE FRONT BUMPER COVER |
![]() |
Apply protective tape, as shown in the illustration.
![]() |
Using a screwdriver, remove the 2 pin hold clips.
Using a clip remover, remove the clip.
Remove the screw.
![]() |
Remove the 8 clips.
Remove the 7 screws.
![]() |
Disengage the 4 claws and remove the front bumper cover.
Disconnect the connectors.