Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION ECU

OCCUPANT CLASSIFICATION ECU > REMOVAL

for Preparation Click here


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)
  1. Remove the front seat assembly RH (Click here).



3. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)
  1. Remove the front seat assembly RH (Click here).



4. REMOVE OCCUPANT CLASSIFICATION ECU (for Manual Seat)


    B194815
  1. Disconnect the connector from the occupant classification ECU.

  1. Disengage the claw and occupant classification ECU.



5. REMOVE OCCUPANT CLASSIFICATION ECU (for Power Seat)


    B194816
  1. Disconnect the 2 connectors from the occupant classification ECU.

  1. Disengage the claw and occupant classification ECU.