Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG CUTOFF SWITCH

CURTAIN SHIELD AIRBAG CUTOFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL CURTAIN AIRBAG CUTOFF SWITCH


E141183
  1. Engage the 2 claws to install the switch.

  1. Connect the connector.



2. INSTALL NO. 1 SWITCH HOLE BASE


    B192562
  1. Engage the 6 claws and install the No. 1 switch hole base.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



4. INSPECT SRS WARNING LIGHT
  1. Inspect the SRS warning light (Click here).