REAR UPPER ARM > REMOVAL |
| 1. REMOVE FUEL TANK ASSEMBLY (for 3UR-FE) |
| 2. REMOVE FUEL TANK ASSEMBLY (for 2UZ-FE) |
| 3. REMOVE REAR WHEEL |
| 4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH |
![]() |
Put matchmarks on the rear height control sensor link and bracket.
Remove the nut and disconnect the rear height control sensor link.
![]() |
Disconnect the rear height control sensor connector.
Remove the nut and the rear height control sensor.
| 5. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY LH |
![]() |
Remove the 2 slide pins.
Remove the cylinder from the rear disc brake cylinder mounting.
| 6. SEPARATE REAR BRAKE FLEXIBLE HOSE |
![]() |
Remove the 3 bolts and disconnect the rear brake flexible hose.
| 7. DISCONNECT REAR SPEED SENSOR WIRE |
Disconnect the rear speed sensor connector.
![]() |
Remove the 4 bolts and disconnect the rear speed sensor wire.
| 8. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH |
![]() |
Remove the 3 bolts and 3 nuts and remove the rear upper control arm.