Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING ECU

POWER STEERING ECU > INSTALLATION

for Preparation Click here



1. INSTALL POWER STEERING ECU ASSEMBLY


C181335
  1. Install the power steering ECU with the nut.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

  1. Connect the power steering ECU connector.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B192335
  1. Engage the 12 clips and install the finish panel.

  1. Connect the 2 connectors and clamp.



    B192334
  1. Engage the 4 claws and install the instrument panel finish panel retainer.



3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT


B192337
  1. Connect the connector and engage the clamp.

  1. Engage the 2 claws to install the safety pad insert.

  1. Install the 4 <A> bolts.



4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B192336
  1. Connect the connectors.

  1. Engage the 4 clips and 2 claws and install the finish panel.



5. INSTALL INSTRUMENT SIDE PANEL LH


    B192332
  1. Engage the 4 guides and 3 claws and install the side panel.



6. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure for both sides.



7. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.