Home › Audio/Visual/Telematics › AUDIO / VIDEO › LUGGAGE SPEAKER

LUGGAGE SPEAKER > INSTALLATION

for Preparation Click here



1. INSTALL W/BOX NO. 1 SPEAKER ASSEMBLY (for 14 Speakers)


    E161046
  1. Install the w/box No. 1 speaker with the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the connector.



2. INSTALL QUARTER SIDE SPEAKER ASSEMBLY RH


    E161055
  1. Install the quarter side speaker RH with the 2 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Engage the guide.

  1. Connect the connector.



3. INSTALL QUARTER SIDE SPEAKER ASSEMBLY LH


    E161054
  1. Install the quarter side speaker LH with the 2 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the connector.



4. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY RH


    B190123
  1. Engage the 5 clips and install the rear window No. 2 side garnish assembly RH.

  1. Install the bolt.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



    B193067
  1. Engage the claw and install the cover.



5. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH (w/o Power Back Door)

HINT:
Use the same procedure for both sides.



6. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH (w/ Power Back Door)


    B191798
  1. Connect the connector.

  1. Engage the 5 clips and install the rear window No. 2 side garnish assembly LH.

  1. Install the bolt.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



    B193892
  1. Engage the claw and install the cover.



7. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Standard)


  1. Connect the connector.


    B190143

  1. Engage the 12 clips and install the quarter trim panel assembly.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B190147
  1. Engage the 2 claws and install the cover.



    B190146
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



8. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Standard)


  1. Connect the connector.


    B190144

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B193068
  1. Engage the 2 claws and install the cover.



    B191816
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B191818
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B193920
  1. Engage the 3 claws to install the outer lap belt anchor cover.



9. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)


  1. Connect the 3 connectors.


    B191799

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B190147
  1. Engage the 2 claws and install the cover.



    B190146
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



10. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat)


  1. Connect the 5 connectors.


    B191800

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clamps and install the wire harness.

  1. Engage the 2 clips.



    B193068
  1. Engage the 2 claws and install the cover.



    B191816
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B191818
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B193920
  1. Engage the 3 claws to install the outer lap belt anchor cover.



11. INSTALL REAR FLOOR MAT SUPPORT PLATE


    B190142
  1. Engage the 5 clips and the 4 claws, and install the rear floor mat support plate.



12. INSTALL ROPE HOOK ASSEMBLY


    B190141
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    B190139
  1. Engage the 2 claws and install the cover.



13. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    B190154E01
  1. Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
    Paint Mark 
    Area
    Color
    RH side
    Pink
    LH side
    Purple



14. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure for both sides.



15. INSTALL REAR DOOR SCUFF PLATE RH


    B186666
  1. Engage the 2 claws and 5 clips to install the rear door scuff plate.

  1. Install the 2 bolts.



    B186665
  1. Engage the 6 claws and the 5 clips and the 2 guides, and install the rear door scuff plate.

  1. Install the screw.



16. INSTALL REAR DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.



17. INSTALL REAR FLOOR STEP NO. 1 COVER


    B191404
  1. Engage the 2 claws and install the rear floor step No. 1 cover.



18. INSTALL REAR FLOOR STEP NO. 2 COVER


    B193890
  1. Engage the 2 claws and the install the rear floor step No. 2 cover.



19. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH


    B191794
  1. Engage the 2 clips and the 5 claws, and install the rear cushion hinge lower cover RH.



20. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH

HINT:
Use the same procedure for both sides.



21. INSTALL REAR NO. 2 SEAT ASSEMBLY RH
  1. for Manual seat:
    Install the rear No. 2 seat assembly RH

  1. for Power Seat:
    Install the rear No. 2 seat assembly RH



22. INSTALL REAR NO. 2 SEAT ASSEMBLY LH
  1. for Manual seat:
    Install the rear No. 2 seat assembly LH

  1. for Power Seat:
    Install the rear No. 2 seat assembly LH



23. INSTALL DECK BOARD BRACKET


    B190119
  1. Install the deck board bracket with the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



24. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY


    B190120
  1. Install the deck board reinforcement with the 4 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



25. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY


    B190117
  1. Engage the 5 clips and install the No. 1 deck board.



26. INSTALL ROPE HOOK ASSEMBLY


    B191405
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    HINT:
    Use the same procedure for both sides.



27. INSTALL LUGGAGE COMPARTMENT TRIM BOX


    B190116
  1. Install the luggage compartment trim box with the 4 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



    B194633
  1. Install the 4 caps.



28. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    B194608
  1. Engage the 4 guides and install the No. 2 deck board.