REAR BLOWER MOTOR > INSTALLATION |
| 1. INSTALL BLOWER WITH FAN (REAR) MOTOR SUB-ASSEMBLY |
![]() |
Install the motor with the 3 screws.
Connect the connector.
| 2. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Standard) |
Connect the connector.

Engage the 12 clips and install the quarter trim panel assembly.
Install the 2 bolts.
Engage the 2 clips.
![]() |
Engage the 2 claws and install the cover.
![]() |
Install the outer lap belt anchor with bolt.
![]() |
Install the outer lap belt anchor with bolt.
![]() |
Engage the 3 claws to install the outer lap belt anchor cover.
| 3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) |
Connect the 3 connectors.

Engage the 12 clips to install the quarter trim panel.
Install the 2 bolts.
Engage the 2 clips.
![]() |
Engage the 2 claws and install the cover.
![]() |
Install the outer lap belt anchor with bolt.
![]() |
Install the outer lap belt anchor with bolt.
![]() |
Engage the 3 claws to install the outer lap belt anchor cover.
| 4. INSTALL REAR FLOOR MAT SUPPORT PLATE |
![]() |
Engage the 5 clips and the 4 claws, and install the rear floor mat support plate.
| 5. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
![]() |
Engage the 2 claws and install the cover.
| 6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
![]() |
Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
| Area | Color |
| RH side | Pink |
| LH side | Purple |
| 7. INSTALL REAR DOOR SCUFF PLATE RH |
![]() |
Engage the 2 claws and 5 clips to install the rear door scuff plate.
Install the 2 bolts.
![]() |
Engage the 6 claws and the 5 clips and the 2 guides, and install the rear door scuff plate.
Install the screw.
| 8. INSTALL REAR FLOOR STEP NO. 1 COVER |
![]() |
Engage the 2 claws and install the rear floor step No. 1 cover.
| 9. INSTALL REAR FLOOR STEP NO. 2 COVER |
![]() |
Engage the 2 claws and the install the rear floor step No. 2 cover.
| 10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH |
![]() |
Engage the 2 clips and the 5 claws, and install the rear cushion hinge lower cover RH.
| 11. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat) |
Install the rear No. 2 seat assembly RH.
![]() |
Insert the 2 locating pins through the 2 body holes and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
Connect the seat wire connector.
![]() |
Install the 2 bolts.
| 12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat) |
Install the rear No. 2 seat assembly RH.
![]() |
Insert the 2 locating pins through the 2 body holes and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
![]() |
Install the 2 bolts.
| 13. INSTALL SEAT TRACK BRACKET FRONT COVER INNER |
![]() |
Engage the 2 guides and claw and clip in the order shown in the illustration, and then install the seat track bracket front cover inner.
| 14. INSTALL SEAT TRACK BRACKET FRONT COVER OUTER |
![]() |
Engage the 2 guides and 2 claws in the order shown in the illustration, and then install the seat track bracket front cover outer.
| 15. INSTALL DECK BOARD BRACKET |
![]() |
Install the deck board bracket with the 2 bolts.
| 16. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY |
![]() |
Install the deck board reinforcement with the 4 bolts.
| 17. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 5 clips and install the No. 1 deck board.
| 18. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
| 19. INSTALL LUGGAGE COMPARTMENT TRIM BOX |
![]() |
Install the luggage compartment trim box with the 4 bolts.
![]() |
Install the 4 caps.
| 20. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 4 guides and install the No. 2 deck board.