CLEARANCE WARNING ECU > INSTALLATION |
| 1. INSTALL CLEARANCE WARNING ECU ASSEMBLY |
![]() |
Install the clearance warning ECU with the 2 nuts.
| 2. INSTALL NO. 1 ECU INTEGRATION BRACKET |
![]() |
Install the No. 1 ECU integration bracket with the bolt and nut.
Connect the 3 connectors and harness clamp.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH |
![]() |
Engage the 4 claws and install the finish panel.
Install the 3 <D> screws and bolt <A>.
| 4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Engage the 2 guides and 4 claws and install the under cover.
| 5. INSTALL INSTRUMENT SIDE PANEL RH |
![]() |
Engage the 3 guides and 3 claws and install the side panel.
| 6. INSTALL COWL SIDE TRIM BOARD RH |
![]() |
Engage the 2 clips to install the cowl side trim board.
Install the clip.
| 7. INSTALL FRONT DOOR SCUFF PLATE RH |
![]() |
Engage the 9 claws to install the scuff plate.