Home › Vehicle Interior › LIGHTING (INT) › FRONT DOOR COURTESY SWITCH

FRONT DOOR COURTESY SWITCH > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT DOOR SCUFF PLATE

HINT:
Use the same procedure as for the RH side .



2. REMOVE REAR DOOR SCUFF PLATE

HINT:
Use the same procedure as for the RH side .



3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

HINT:
Use the same procedure as for the RH side .



4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

HINT:
Use the same procedure as for the RH side .



5. REMOVE LOWER CENTER PILLAR GARNISH

HINT:
Use the same procedure as for the RH side .



6. REMOVE COURTESY LIGHT SWITCH


    E161807
  1. Using "TORX" socket wrench T30, remove the screw.

  1. Disconnect the connector and remove the courtesy light switch.