Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY

SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH


    B166379E01
  1. Check the door mirror turn indicator.

    1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 3 (TS+)
      Battery negative (-) → Terminal 4 (TS-)
      Door mirror turn indicator illuminates

      If the result is not as specified, replace the mirror assembly.



2. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH


    B166380E01
  1. Check the door mirror turn indicator.

    1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 3 (TS+)
      Battery negative (-) → Terminal 4 (TS-)
      Door mirror turn indicator illuminates