Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    E161825
  1. Install the rear combination light onto the vehicle.



    E161824
  1. Tighten the 2 nuts.

    Torque:
    6.4 N*m{ 65 kgf*cm , 56 in.*lbf }

  1. Connect the 2 connectors.



2. INSTALL QUARTER TRIM COVER LH (for 14 Speakers)


    E161821
  1. Engage the 4 claws and 2 guides and install the quarter trim cover.



3. INSTALL QUARTER TRIM COVER LH (for 8 Speakers)


    E161822
  1. Engage the 4 claws and 2 guides and install the quarter trim cover.



4. INSTALL QUARTER TRIM COVER RH (for RH Side)


    E161823
  1. Engage the 4 claws and 2 guides and install the quarter trim cover.