Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR COMBINATION LIGHT GASKET


    E161826
  1. Remove the rear combination light gasket.

    NOTICE:
    1. Detach the gasket if it adheres to the body.
    2. Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.



2. REMOVE TAIL AND STOP LIGHT BULB


    E161827
  1. Turn the tail and stop light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the tail and stop light bulb from the light socket.



3. REMOVE REAR TURN SIGNAL LIGHT BULB


    E161829
  1. Turn the rear turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the rear turn signal light bulb from the light socket.