LICENSE PLATE LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE BACK DOOR CENTER GARNISH |
![]() |
Disengage the 4 clips and the claw and remove the back door center garnish.
| 2. REMOVE BACK DOOR SIDE GARNISH RH |
![]() |
Disengage the 2 clips and remove the back door side garnish RH.
| 3. REMOVE BACK DOOR SIDE GARNISH LH |
![]() |
Disengage the 3 clips and remove the back door side garnish LH
| 4. REMOVE BACK DOOR STRAP COVER |
![]() |
Slide the back door strap cover and disengage the claw and remove the back door strap cover.
| 5. REMOVE BACK DOOR PULL STRAP |
![]() |
Remove the bolt and remove the back door pull strap.
| 6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY |
![]() |
Disengage the 11 clips and remove the back door trim board assembly.
| 7. REMOVE BACK DOOR SERVICE HOLE COVER |
![]() |
Remove the back door service hole cover.
| 8. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
![]() |
Remove the 4 nuts.
Disconnect the connector.
![]() |
Disengage the 2 clips and remove the back door outside garnish.
| 9. REMOVE REAR TELEVISION CAMERA ASSEMBLY |
Remove the 2 nuts.
![]() |
Disconnect the connector.
![]() |
Disengage the 2 claws and remove the rear television camera.
| 10. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
![]() |
Remove the 4 screws.
Disconnect the 4 harness clamps and remove the license plate light.
| 11. REMOVE LICENSE PLATE LIGHT BULB |
Remove the license plate light bulb from the light socket.