Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF RACK

ROOF RACK > INSTALLATION

for Preparation Click here



1. INSTALL ROOF INNER RACK RETAINER


B191699
  1. Install the roof inner rack retainer.



2. INSTALL ROOF RACK LEG CENTER CUSHION LH


B195992
  1. Engage the 3 claws and install the roof rack leg center cushion.



3. INSTALL ROOF RACK LEG CENTER CUSHION RH


4. INSTALL ROOF RACK LEG REAR CUSHION LH


B191697
  1. Engage the 2 claws and install the roof rack leg rear cushion.



5. INSTALL ROOF RACK LEG REAR CUSHION RH

HINT:
Use the same procedure as for the LH side.



6. INSTALL ROOF RACK LEG FRONT CUSHION LH


B191696
  1. Engage the 2 claws and install the roof rack leg front cushion.



7. INSTALL ROOF RACK LEG FRONT CUSHION RH

HINT:
Use the same procedure as for the LH side.



8. INSTALL ROOF RACK REAR LEG LH


B191695
  1. Install the roof rack rear leg with the 2 screws.



9. INSTALL ROOF RACK REAR LEG RH

HINT:
Use the same procedure as for the LH side.



10. INSTALL ROOF RACK FRONT LEG LH


B191693
  1. Install the roof rack front leg with the 2 screws.



11. INSTALL ROOF RACK FRONT LEG RH

HINT:
Use the same procedure as for the LH side.



12. INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY LH


B191692
  1. Using a "TORX" socket wrench T30, install the roof rack center support LH with the 2 screws.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



13. INSTALL ROOF CARRIER SUB-ASSEMBLY LH


B191691
  1. Using a "TORX" socket wrench T30, install the roof carrier LH with the 6 screws.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



14. INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY


B191690
  1. Using a "TORX" socket wrench T30, install the roof rack center support with the 4 screws.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



15. INSTALL ROOF RACK CENTER SUPPORT SUB-ASSEMBLY RH


B191689
  1. Using a "TORX" socket wrench T30, install the roof rack center support RH with the 2 screws.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



16. INSTALL ROOF CARRIER SUB-ASSEMBLY RH
  1. Provisionally install the roof rack center support into the roof carrier.



    B191688
  1. Using a "TORX" socket wrench T30, install the roof carrier RH with the 6 screws.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



    B191687
  1. Using a "TORX" socket wrench T30, install the 4 screws.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



17. INSTALL ROOF RACK LEG REAR COVER LH


B191686
  1. Engage the 3 claws and clip and install the roof rack leg rear cover.



18. INSTALL ROOF RACK LEG REAR COVER RH

HINT:
Use the same procedure as for the LH side.



19. INSTALL ROOF RACK LEG CENTER COVER LH


B191685
  1. Engage the 2 claws and clip and install the roof rack leg center cover.



20. INSTALL ROOF RACK LEG CENTER COVER RH

HINT:
Use the same procedure as for the LH side.



21. INSTALL ROOF RACK LEG FRONT COVER LH


B191684
  1. Engage the 3 claws and clip and install the roof rack leg front cover.



22. INSTALL ROOF RACK LEG FRONT COVER RH

HINT:
Use the same procedure as for the LH side.