FRONT DOOR BELT MOULDING > INSTALLATION |
| 1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY |
![]() |
Engage the 5 claws and clip and install a new front door glass outer weatherstrip.
| 2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY |
![]() |
Temporarily install the mirror by inserting the claw on the mirror into the holes on the vehicle.
Tighten the 3 nuts in the sequence shown in the illustration and install the mirror.
| 3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
| 4. INSTALL FRONT ARMREST BASE UPPER PANEL |
| 5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG |
| 6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH |