FRONT DOOR BELT MOULDING > REMOVAL |
| 1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH |
| 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG |
| 3. REMOVE FRONT ARMREST BASE UPPER PANEL |
| 4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
| 5. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 nuts.
Disengage the claw and remove the outer rear view mirror assembly.
| 6. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY |
![]() |
Apply protective tape to the door panel in the area around the front door glass outer weatherstrip.
![]() |
Using a moulding remover, disengage the 5 claws and the clip and remove the front door glass outer weatherstrip.