Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL ROCKER PANEL FRONT MOULDING ASSEMBLY


    B191707
  1. Engage the clip and install the rocker panel front moulding.

  1. Tighten the screw.



2. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY


    B191706
  1. Engage the claw and install the body rocker panel moulding.

  1. Tighten the 4 screws.



3. INSTALL SIDE STEP ASSEMBLY


B191679
  1. Install the side step with the 8 bolts.

    Torque:
    20 N*m{ 199 kgf*cm , 14 in.*lbf }