Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE SIDE STEP ASSEMBLY


B191679
  1. Remove the 8 bolts and side step.



2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    B191706
  1. Remove the 4 screws.

  1. Disengage the claw and remove the body rocker panel moulding.



3. REMOVE ROCKER PANEL FRONT MOULDING ASSEMBLY


B191707
  1. Remove the screw.

  1. Disengage the clip and remove the rocker panel front moulding.