Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR WINDOW FRAME MOULDING

REAR DOOR WINDOW FRAME MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL REAR DOOR WINDOW FRAME REAR MOULDING
  1. Apply Primer G to the installation part of rear door window frame rear moulding.

    NOTICE:
    1. Allow the primer to dry for 3 minutes or more.
    2. Throw away any leftover Primer G.
    3. Do not apply too much Primer G.

  1. Remove the release paper from the rear door window frame rear moulding.



    B191717
  1. Engage the claw and clip and install the rear door window frame rear moulding.