Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT ARMREST BASE UPPER PANEL RH


    B190537
  1. Disengage the 2 clips and 5 claws and remove the front armrest base upper panel.

  1. Disconnect the connector.



2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B191725E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.