REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side) > DISASSEMBLY |
| 1. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY |
![]() |
Remove the 2 clips.
![]() |
Remove the bolt and rear No. 2 seat inner belt sub-assembly.
| 2. REMOVE REAR SEAT LOCK COVER INNER LH |
![]() |
Remove the screw.
Disengage the 3 claws and remove the rear seat lock cover inner.
| 3. REMOVE REAR SEAT LOCK COVER OUTER RH |
![]() |
Remove the screw.
Disengage the 2 claws and remove the rear seat lock cover outer.
| 4. REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY RH |
![]() |
Remove the 2 bolts.
Using a T45 "TORX" socket, remove the 2 bolts and 2 bushes. Then remove the rear No. 2 seat cushion assembly.
| 5. REMOVE NO. 3 SEAT CUSHION SPRING ASSEMBLY RH |
![]() |
Remove the 5 hog rings.
![]() |
Remove the hooks and No. 3 seat cushion spring assembly.
| 6. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH |
![]() |
Remove the 10 hog rings and No. 2 seat cushion cover sub-assembly.
| 7. REMOVE REAR SEAT CUSHION COVER LH |
![]() |
Remove the screw.
Disengage the claw and remove the rear seat cushion cover.
| 8. REMOVE REAR SEAT CUSHION COVER OUTER RH |
![]() |
Remove the screw.
Disengage the claw and remove the rear seat cushion cover.
| 9. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 10. REMOVE REAR NO. 2 SEAT HANDLE |
![]() |
Remove the 2 screws.
Disconnect the cable and remove the rear No. 2 seat handle.
| 11. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH |
![]() |
Remove the screw.
Disconnect the cable and remove the rear back lock control lever sub-assembly.
| 12. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH |
![]() |
Disengage the 9 clips and remove the rear seatback board sub-assembly.
| 13. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY |
![]() |
Disengage the 4 claws and remove the 2 rear No. 2 seat headrest supports.
| 14. REMOVE SEATBACK COVER WITH PAD |
![]() |
Disengage the hook.
![]() |
Disengage the hooks and remove the seatback cover with pad.
| 15. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH |
![]() |
Remove the 13 hog rings and No. 2 seatback cover from the seatback pad.
| 16. REMOVE REAR SEAT RECLINING COVER INNER LH |
![]() |
Remove the screw.
Disengage the claw and remove the rear seat reclining cover.
| 17. REMOVE REAR SEAT RECLINING COVER INNER RH |
![]() |
Remove the screw.
Disengage the claw and remove the rear seat reclining cover.
| 18. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY |
![]() |
Disengage the 3 cable ties.
Disconnect the 2 clamps.
Rotate the cable ends and remove the cable assembly.
Pull the cable through the No. 3 seatback frame sub-assembly.
| 19. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY RH |
![]() |
Remove the 5 bolts and No. 3 seatback frame sub assembly.
| 20. REMOVE REAR NO. 2 SEAT ROD SUB-ASSEMBLY |
![]() |
Remove the 2 bolts and No. 2 seat rod sub-assembly.