REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side) > INSTALLATION |
| 1. INSTALL REAR NO. 2 SEAT ASSEMBLY RH |
Install the rear No. 2 seat assembly RH.
![]() |
Insert the 2 locating pins through the 2 body holes and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
Connect the seat wire connector.
![]() |
Install the 2 bolts.
| 2. INSTALL SEAT TRACK BRACKET FRONT COVER OUTER |
![]() |
Engage the 2 guides and claw and clip in the order shown in the illustration, and then install the seat track bracket front cover inner.
![]() |
Engage the 2 guides and 2 claws in the order shown in the illustration, and then install the seat track bracket front cover outer.
| 3. INSTALL SEAT TRACK BRACKET FRONT COVER INNER |
| 4. INSTALL DECK BOARD BRACKET |
![]() |
Install the deck board bracket with the 2 bolts.
| 5. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY |
![]() |
Install the deck board reinforcement with the 4 bolts.
| 6. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 5 clips and install the No. 1 deck board.
| 7. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
| 8. INSTALL LUGGAGE COMPARTMENT TRIM BOX |
![]() |
Install the luggage compartment trim box with the 4 bolts.
![]() |
Install the 4 caps.
| 9. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 4 guides and install the No. 2 deck board.