Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 1 Seat)

REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 1 Seat) > INSTALLATION

for Preparation Click here



1. INSTALL CENTER SEAT INNER BELT ASSEMBLY


    B191158
  1. Install center seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL REAR SEAT CUSHION UNDER COVER


    B191157
  1. Install the rear seat cushion under cover with the 2 screws.



3. INSTALL CENTER SEAT HINGE COVER RH


    B191156
  1. Engage the 3 claws and clip to install the center seat hinge cover.

  1. Install the screw.



4. INSTALL CENTER SEAT HINGE COVER LH


    B191155
  1. Engage the 3 claws and clip to install the center seat hinge cover.

  1. Install the screw.



5. INSTALL CENTER SEAT CUSHION ASSEMBLY


B191150E01
  1. Install the 2 bushes to the cushion spring. Then, using a T45 "TORX" socket, install the 2 bolts.

    1. for Bolt A

    Torque:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }

  1. Install the 2 bolts.

    1. for Bolt B

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



    B191149
  1. Engage the hook and loop fastener and hook.



6. INSTALL REAR SEAT CUSHION HINGE COVER UPPER RH


    B191148
  1. Engage the 2 claws and install the rear seat cushion hinge cover upper.

  1. Install the screw.

  1. Engage the hook.



7. INSTALL REAR SEAT CUSHION HINGE COVER UPPER LH


    B191147
  1. Engage the 2 claws and install the rear seat cushion hinge cover upper.

  1. Install the screw.

  1. Engage the hook.



8. INSTALL REAR CENTER SEAT ASSEMBLY
  1. Install the rear center seat assembly (Click here).