Home › Vehicle Interior › SEAT › POWER SEAT CONTROL ECU (for RH Side)

POWER SEAT CONTROL ECU (for RH Side) > INSTALLATION

for Preparation Click here



1. INSTALL FOLD SEAT CONTROL ECU


    B194058
  1. Install the fold seat control ECU with the 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the 2 connectors.



2. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Manual Seat)


  1. Connect the connector.


    B190143

  1. Engage the 12 clips and install the quarter trim panel assembly.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B190147
  1. Engage the 2 claws and install the cover.



    B190146
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)


  1. Connect the 3 connectors.


    B191799

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B190147
  1. Engage the 2 claws and install the cover.



    B190146
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



4. INSTALL REAR FLOOR MAT SUPPORT PLATE


    B190142
  1. Engage the 5 clips and the 4 claws, and install the rear floor mat support plate.



5. INSTALL ROPE HOOK ASSEMBLY


    B190141
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    B190139
  1. Engage the 2 claws and install the cover.



6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    B190154E01
  1. Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
    Paint Mark 
    Area
    Color
    RH side
    Pink
    LH side
    Purple



7. INSTALL REAR DOOR SCUFF PLATE RH


    B186666
  1. Engage the 2 claws and 5 clips to install the rear door scuff plate.

  1. Install the 2 bolts.



    B186665
  1. Engage the 6 claws and the 5 clips and the 2 guides, and install the rear door scuff plate.

  1. Install the screw.



8. INSTALL REAR FLOOR STEP NO. 1 COVER


    B191404
  1. Engage the 2 claws and install the rear floor step No. 1 cover.



9. INSTALL REAR FLOOR STEP NO. 2 COVER


    B193890
  1. Engage the 2 claws and the install the rear floor step No. 2 cover.



10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH


    B191794
  1. Engage the 2 clips and the 5 claws, and install the rear cushion hinge lower cover RH.



11. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
  1. Install the rear No. 2 seat assembly RH .



12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
  1. Install the rear No. 2 seat assembly RH .