Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR BELT MOULDING

BACK DOOR BELT MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY


    B195693
  1. Engage the 9 claws and install the back door glass outer weatherstrip.



2. INSTALL LINEAR WIPER STEP RH


B190526
  1. Engage the claw and guide and install the liner wiper step.



3. INSTALL BACK DOOR OUTSIDE MOULDING LH


    B191708
  1. Engage the 5 clips and install the new back door outside moulding.



4. INSTALL BACK DOOR OUTSIDE MOULDING RH

HINT:
Use the same procedure as for the LH side.